Bidet Attachment for Toilet - Left Handed Bidet Ultra-Slimt Non-Electric Dual Nozzle (Frontal & Rear Wash) Adjustable Water Pressure, Water Bidet Toilet Seat Attachment,Easy to Install (Silver)

Installation Process First of all Turn OFF the water supply valve,then drain all the water in the toilet tank. Steps 1. Fix the bidet on the toilet. 2. Connect the T-Adapter to the toilet tank water inlet. Hand tighten. 3. Connect the other end of the metal braided metal hose to the T-Adapter. Hand tighten. 4. Connect the existing water supply flexible hose to the other end of the T-Adapter. Hand tighten. 5. Connect one end of the flexible braided metal hose to the water inlet of the bidet. Hand tighten. 6. Open the water supply valve. You will receive 1 * Bidet Attachment 1 * Braided Metal Hose x 1 Meter 1 * Brass T-adapter 2 * Fixing Plates 1 * Rubber Washer 1 * Use Manul/Installation Guide 1 * Tefion Tape

• 【EASY INSTALLATION】No plumber and no batteries required; Just take 10 minutes to install,Comes with all necessary instructions and connectors for an easy install.
• 【SIMPLE KNOB ADJUSTMENT WITH 2 MODES】Bidet attachment of toilet comes with 2 separate nozzles for front and rear cleansing, only spin an spray knob on the bidet to choose modes and adjust the water pressure, which goes from soft to strong, give you a comfortable wash！Elderly and children can also easily use it to get ideal intensity.
• 【THIN AND COMPATIBLE】- This bidet sprayer for toilet is only a quarter-inch thick! No need to worry about toilet paper shortages with a bidet! The unique design provides support, maintains the toilet seat level and fits more comfortably with standard toilets.
• 【SELF-CLEANING NOZZLES】 When the switch knob slowly rotates from the stop position, the water pressure gradually increases from the minimum to the maximum; when the water pressure approaches the minimum, the water flow along the nozzle outer wall first carries on the self-cleaning, gradually increasing water pressure will be converted to a flushing state
• 【NOZZLE PROTECTION DESIGN】WITHLENT upgraded bidet,the nozzle of the bidet is set with a downward inclined arc,so that when the toilet ring is put down,it will not touch the nozzle of the bidet and will not cause the nozzle to break.There is no gap between the toilet ring and the toilet.Suitable for more toilets.
• 【HIGH QUALITY MATERIAL】The water inlet is made of brass. Compared to traditional plastic water inlets, it is more durable and less prone to damage.Accessories are braided steel hose, 1 brass metal T-adapter, 1 assembly manual. The steel hose replaces the traditional plastic, which improves the durability and cost-effectiveness of the toilet seat.